News

PolarStar F1

The wait is finally over. The PolarStar F1 is finally available.

In addition to supporting gearboxes with offset nozzles (V7 & V6), the F1 incorporates a unique flow control system. This not only regulates nozzle speed based on the direction of travel, but also allows for a 2-stage firing system.

Like the Fusion Engine and JACK, the patent pending F1 is a high performance HPA (High Pressure Air) system which replaces the traditional piston and gears of an AEG with a programmable pneumatic system.

Flow Control

The unique flow control system uses an integral check valve to regulate the forward speed of the nozzle while maintaining the fastest retract speed possible. This system is also what makes the F1's "2-stage" firing possible. When the nozzle is traveling in the forward direction the check valve is sealed, limiting the speed of the nozzle for greater consistency. When the nozzle reaches the forward position the check valve opens to allow the maximum flow into the barrel. The additional flow is maintained throughout the rearward travel of the nozzle, allowing it to retract without limiting the speed.

Compact and Efficient

The F1 uses a custom solenoid designed by PolarStar and manufactured by MAC Valves. The design allows the solenoid to become an integral part of the system and not simply a a switch to control gas flow. This not only makes the F1 more compact but also minimizes the dead volume inside of the system, increasing efficiency and decreasing response time.

Offset Nozzles

The F1 is compatible with virtually every AEG gearbox, including those with offset nozzles by using either a centerline or offset front cylinder. The front cylinders are interchangable and a centerline F1 may be converted to an offset F1 by simply swapping the front cylinder and nozzle.

Cross-Compatible Electronics

All PolarStar single-solenoid systems (JACK and F1) use the same electronics, making the F1 compatible with any kit already available for JACK. Some of the switchboards that are already available or coming soon include:


About Us

PolarStar Airsoft was formed in 2009 as a part of PolarStar Engineering & Machine with the goal of bringing our engineering experience and focus on quality to airsoft. Since then, PolarStar has made innovative airsoft products of the highest quality, designed and manufactured in the USA.

PolarStar products, including the patented Fusion Engine are designed by airsoft players, incorporating airsoft experience with the feedback of the commnity.

Latest News

PolarStar F1Posted 2016-05-13
HPA Speed TriggerPosted 2016-06-23

Address

PolarStar Airsoft
5 Garfield Way
Newark, DE 19713
P: (302) 449-4866